DIY Plant Stand Woodworking Plan PDF
Dec 27, 2021
Step-By-Step Wood Plant Stand DIY Building Plan
This unique plant stand is both practical and attractive and is sure to brighten up any corner of your house (Picture below). This plant stand plan comes with a mounted removable tile top for easy cleaning and replacement.
The plans call for inexpensive Philippine mahogany to build the base, but you can use any type of wood you like.
Get Instant Access To Over 16,000 Woodworking Plans Here
Plant Stand Plan Overview Information
- Overall Size: 15 7/8 W by 28H by 15 7/8 D
- Material: Mahogany
- Joinery: Dowel Joints
- Construction Details:
The tile top is mounted to a removable tray so the tile can be cleaned and replaced if it breaks or becomes worn
Top rails keep objects from sliding off the tile surface
Decorative chamfers on tops of solid mahogany legs
Lower shelf functions as a stretcher between legs
- Finishing Options: Clearcoat with tung oil varnish. Paste filler for wood grain is a good option for mahogany. Match the wood tones for tile color.
Building Time For This Project
- Preparing Stock: 1-2 Hours
- Layout: 2-4 Hours
- Cutting Parts: 2-4 Hours
- Assembly: 2-4 Hours
- Finishing: 1-2 Hours
- Total Time: 8-16 Hours
Tools Needed For This Project
- Table Saw
- Jointer
- Planer
- Router Table with a piloted chamfering bit
- Tape Measure
- 24-in or longer bar or pipe clamps (6)
- C-clamps
- Spring clamps
- Combination square
- Doweling Jig
- Drill/Driver
- Back Saw or Dovetail Saw
- Portable Drill Guide
- Power Sander
Get Instant Access To The World's Largest Collection Of Over 16,000 Woodworking Plans Here
Shopping List For Plant Stand Woodworking Plan
- (2) 1 1/2 x 1 1/2 in. x 6 ft. Mahogany (Philippine or Honduras-- Philippine is shown here.)
- (1) 3/4 x 8 in. x 8ft. Mahogany
- 1/2-in.-plywood scrap for tray bottom (birch ply-wood is shown)
- (1) 12 x 12-in. ceramic floor tile (or smaller tiles to create a 12x12-in sheet)
- Tile adhesive, grout, and penetrating sealer
- (1) 3/8- in.-dia.; (1) 1/4-in. dia. wood dowel for shelf pins
- #6x1, 1 1/4-in. wood screws
- Wood glue
- Finishing materials